verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X200-20

The AirTAC SEJ Adjustable Cylinder SEJ40X200-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 180–200mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke200 mm
  • Adjust window20 mm
  • Effective stroke180–200 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$86.50 $94.00Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X200-20

The AirTAC SEJ40X200-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. You can dial the retract end from 180 to 200mm to perfectly match a stop or fine-tune end positions during machine commissioning.

This extruded aluminum barrel design omits external tie rods for a clean profile. It includes field-adjustable air cushions at both ends to manage deceleration over the 30mm cushion length. Note that this SKU lacks a magnet, so it will not support CMSE or DMSE position sensors without modification.

Airtac SEJ Adjustable Cylinder SEJ40X200-20 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X200-20
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke200 mm
Adjustment window20 mm (180–200 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X200-20

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×200Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X200-20 Is Used

tune

Press Stroke Tuning

Dial in the exact 180-200mm clamping reach on a small pneumatic press, utilizing the 528N both-way force to secure sheet metal blanks during forming.

swap_horiz

Packaging Changeover

Adjust the retract stop to accommodate different carton heights on a packaging line, shifting the end position within the 20mm window without changing cylinder mounts.

Is the Airtac SEJ Adjustable Cylinder SEJ40X200-20 the Right Cylinder?

The 20mm adjustment window lets you cover a 180-200mm effective stroke range, ideal for dialing in precise end positions without swapping hardware. If your application requires less force, the next bore down (32mm) provides 345N both ways at 0.5 MPa; if you need more push, stepping up to the 50mm bore yields 825N both ways. If your stroke length is fixed and never needs on-machine tuning, a standard SED double-rod cylinder is sufficient. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. When replacing, match the 40mm bore, 200mm nominal stroke, PT1/4 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X200-20 FAQ

A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 20mm. This provides an effective stroke range of 180 to 200mm, which you lock in place during commissioning to set the exact mechanical end position.

Because it is a double-rod cylinder, force is equal in both directions: 528N at 0.5 MPa, 739N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552 / VDMA 24562.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X200-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X200-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.