
The AirTAC SEJ Adjustable Cylinder SEJ40X200-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 180–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X200-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A back-rod stop screw lets you dial in the retract end position, yielding an effective 180-200mm stroke for precise machine commissioning.
This 40mm bore unit includes a magnet for CMSE reed or DMSE electronic sensors and uses field-adjustable air cushions at both ends to decelerate the load near stroke end. The extruded aluminum barrel omits external tie rods, and the PT1/4 ports and M12x1.25 rod thread provide standard ISO 15552 mounting interchangeability.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X200-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 20 mm (180–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 180-200mm retract distance on an adhesive dispensing head, using the 528 N both-way force to lift the nozzle cleanly without drift.
Switch a carton erector between different box heights by adjusting the retract stop up to 20mm, avoiding hardware swaps while maintaining symmetrical push and pull force.
Fine-tune the end-of-stroke position during machine setup for a light-duty press operation, relying on the adjustable stop screw to lock the exact 190mm target.
Verify the 20mm adjustment window covers your required end-position variance. If your application requires less force, step down to the 32mm bore (345 N both ways at 0.5 MPa); if you need more power, step up to the 50mm bore (825 N both ways). If the stroke never varies after commissioning, a fixed-stroke SED cylinder is sufficient. Remember that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, match the 40mm bore, 200mm stroke, 20mm window, PT1/4 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The retract end has a mechanical stop screw on the rear rod that allows you to shorten the stroke by up to 20mm. The effective stroke range is 180-200mm, which you set and lock during commissioning.
Because it is a double-rod cylinder, the force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.