
The AirTAC SEJ Adjustable Cylinder SEJ40X200-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 170–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X200-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly equal in both directions at 528 N (0.5 MPa) and 739 N (0.7 MPa). The rear rod features a mechanical stop screw, letting you dial the retract stroke back from 200 mm to a 170 mm minimum for precise machine commissioning.
This extruded aluminum barrel profile cylinder includes a magnet for CMSE reed or DMSE electronic sensors. It provides field-adjustable air cushions at both ends to manage deceleration over the 30 mm cushion length. The PT1/4 port and M12x1.25 rod thread simplify integration, while the longer overall length accommodates the dual-rod guidance.
The adjustment window covers a 30 mm range, letting you fine-tune the exact end position on the machine without swapping hardware. If your application needs less push, step down to the 32 mm bore (345 N at 0.5 MPa); for higher thrust, step up to the 50 mm bore (825 N at 0.5 MPa). If your positioning never changes, a fixed-stroke SED cylinder is enough. For fail-safe holding on air loss, use an external rod lock or BSED, as the cushion and stop screw are not brakes. At 200 mm stroke, guide external loads to prevent side-load wear. Verify the ISO 15552 replacement match by confirming the 40 mm bore, 200 mm stroke, PT port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
| Model | Airtac SEJ Adjustable Cylinder SEJ40X200-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 30 mm (170–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm window to hit a precise 185 mm fold depth on carton flaps, leveraging the 528 N both-way force to press consistently.
Quickly reposition the retract end from 200 mm down to 170 mm to accept varying part heights on a conveyor without changing cylinder hardware.
Use the rear rod stop screw to micro-adjust the end-of-stroke position during commissioning, ensuring the 739 N at 0.7 MPa places parts exactly.
The adjustment window covers a 30 mm range, letting you fine-tune the exact end position on the machine without swapping hardware. If your application needs less push, step down to the 32 mm bore (345 N at 0.5 MPa); for higher thrust, step up to the 50 mm bore (825 N at 0.5 MPa). If your positioning never changes, a fixed-stroke SED cylinder is enough. For fail-safe holding on air loss, use an external rod lock or BSED, as the cushion and stop screw are not brakes. At 200 mm stroke, guide external loads to prevent side-load wear. Verify the ISO 15552 replacement match by confirming the 40 mm bore, 200 mm stroke, PT port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The rear rod stop screw provides a 30 mm adjustment window, allowing the effective retract stroke to be dialed down from 200 mm to 170 mm. You lock the screw after setting the exact end position needed for your machine.
Because it is a double-rod cylinder, force is equal both ways: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.