
The AirTAC SEJ Adjustable Cylinder SEJ40X210-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø40mm unit covers an effective stroke of 135–210mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X210-75S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window. You can dial the retract end from 135 mm up to the nominal 210 mm.
This extruded aluminum barrel omits external tie rods for a clean profile. A stop screw on the back rod mechanically sets the end position, which you lock after fine-tuning. The -S magnet enables CMSE reed or DMSE electronic position sensing, while adjustable air cushions at both ends decelerate the load smoothly.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X210-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 210 mm |
| Adjustment window | 75 mm (135–210 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×210 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75 mm window to hit exact clamping depth on raw castings. The equal 528 N both-way force ensures consistent grip pressure during machining.
Adjust the retract stroke from 135 to 210 mm when switching box sizes on a packaging line. The -S magnet flags DMSE sensors to confirm retracted position.
Use the back rod as a mechanical stop for varying product lengths on a conveyor.
Confirm this 75 mm adjustment window covers your positioning range. If you need less force, stepping down to the 32 mm bore yields 345 N at 0.5 MPa; stepping up to the 50 mm bore provides 825 N. If your end position never changes, a fixed-stroke SED is sufficient. For variable stops during part changeover, this SEJ is ideal.
The air cushion and mechanical stop screw decelerate the load and set the end position, but a plain SEJ does not hold position on air loss. For fail-safe holding, use an external rod lock. Since the 210 mm stroke exceeds 300 mm, external guides are recommended to manage side loads. This PT1/4 ported cylinder matches ISO 15552 dimensional interchangeability.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 75 mm. For this SEJ40X210-75S model, the effective stroke range is 135 to 210 mm. You lock the screw after setting the exact end position.
Because it is a double-rod cylinder, force is equal in both directions. It outputs 528 N at 0.5 MPa, 739 N at 0.7 MPa, and reaches a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.