
The AirTAC SEJ Adjustable Cylinder SEJ40X225-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 215–225mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X225-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This yields an equal force of 528 N each way at 0.5 MPa, preventing speed discrepancies between extend and retract motions.
You can mechanically dial in the retract end-position from 215mm to 225mm via a stop screw on the back rod, then lock it down. This allows precise on-machine commissioning without swapping hardware. The extruded aluminum barrel omits external tie rods, and the built-in magnet supports CMSE reed and DMSE electronic sensors for exact positioning feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X225-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 225 mm |
| Adjustment window | 10 mm (215–225 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×225 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Quickly reposition the tucking flap mechanism for different carton sizes, using the adjustable back-rod stop to match new part heights without changing the cylinder body.
Confirm this 10mm adjustment window covers your fine-tuning range; for larger travel corrections, consider a 20mm or 30mm variant. If your application needs less force, step down to the 32mm bore delivering 345 N at 0.5 MPa. If pushing heavier loads, step up to the 50mm bore providing 825 N at 0.5 MPa. A fixed-stroke SED is sufficient if you require no end-position tuning.
This plain SEJ does not hold position on air loss; the adjustable air cushion at both ends only decelerates the piston near the stroke end. For fail-safe holding, specify a BSED or use an external rod lock. Because the 225mm stroke is over 300mm, ensure external guides manage side loads to prevent rod binding. The PT1/4 port and M12x1.25 rod thread match standard ISO 15552 mounting interfaces.
Quick checklist
The retract stroke can be mechanically adjusted over a 10mm window, giving an effective stroke range of 215mm to 225mm. You set the exact end-position via a stop screw on the back rod and lock it in place during machine commissioning.
Because the rod exits both ends, the force is identical in both directions: 528 N at 0.5 MPa and 739 N at 0.7 MPa. The maximum force is 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.