
The AirTAC SEJ Adjustable Cylinder SEJ40X25-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 15–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X25-10 is a double-acting, double-rod ISO 15552 profile cylinder with a 10mm adjustable stroke window, yielding an effective stroke range of 15-25mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This provides an equal force of 528 N each way at 0.5 MPa, eliminating speed disparities between extend and retract motions.
You dial in the exact retract end position via a mechanical stop screw on the back rod, which must be locked after setting. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends provide smooth deceleration over the 30mm cushion length. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X25-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 10 mm (15–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in a precise 15-25mm clamping distance on a machining fixture using the 528 N both-way force to adapt to varying part thicknesses without swapping hardware.
Fine-tune the retract position of a 40mm double-rod diverter gate during product format changeovers, locking the stop screw once the exact end spot is set.
Test optimal end positions on a short-stroke assembly press, adjusting the stroke within the 10mm window to find the perfect contact point before final locking.
Confirm the 10mm adjustment window covers your positioning range. If you need less force, the adjacent 32mm bore provides 345 N both ways at 0.5 MPa; if you need more, step up to the 50mm bore for 825 N. If your end position never changes, a fixed-stroke SED cylinder is sufficient. Remember that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock. Match your ISO 15552 replacement by verifying the 40mm bore, 25mm stroke, PT1/4 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The retract stroke can be dialed in over a 10mm window, giving an effective stroke range of 15-25mm. You set the exact end position using a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.