
The AirTAC SEJ Adjustable Cylinder SEJ40X25-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 15–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X25-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, ensuring identical annulus area for equal force and speed in both directions—delivering 528 N each way at 0.5 MPa. A stop screw on the back rod provides a 10 mm adjustable stroke window, letting you dial the retract end from 15 mm up to the 25 mm nominal stroke for precise machine commissioning.
This extruded aluminum barrel profile cylinder features field-adjustable air cushions at both ends (30 mm cushion length) and a PT1/4 port. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for exact position feedback. The Ø16 mm rod uses an M12x1.25 thread, and the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X25-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 10 mm (15–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 15-25 mm clamping reach on a machining fixture, using the 528 N both-way force to secure parts without over-traveling.
Adjust the retract end position up to 10 mm to accommodate different product heights on a packaging conveyor during format changeovers.
Test and set precise end-of-stroke limits on R&D assembly jigs, locking the back-rod stop screw once the optimal position is found.
This 10 mm adjustment window is ideal for fine-tuning a short end position on the machine without swapping hardware; lock the stop screw after setting your 15-25 mm effective stroke. If your application needs less push, the 32 mm bore provides 345 N both ways at 0.5 MPa. If you require more force, step up to the 50 mm bore for 825 N both ways. If your positioning is fixed and never changes, a standard SED double-rod cylinder is sufficient. For fail-safe load holding on air loss, this cylinder will not lock; use an external rod lock or BSED series instead. Because the stroke is under 300 mm, side-load stress is minimal, but always ensure external guides for heavy radial loads.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 10 mm window. You can dial the effective stroke anywhere from 15 mm up to the 25 mm nominal stroke, then lock it in place.
As a double-rod cylinder, force is equal both ways: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.