
The AirTAC SEJ Adjustable Cylinder SEJ40X25-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X25-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas, so output force is equal in both directions at 528 N each way at 0.5 MPa. You can dial the retract end-position up to 20 mm, providing an effective stroke range of 5 to 25 mm.
A stop screw on the back rod sets the precise travel limit, which you lock in place after positioning. This 40 mm bore cylinder uses a PT1/4 port and Ø16 mm rod. It includes field-adjustable air cushions at both ends to decelerate the load near stroke end, and this specific SKU lacks a magnet, so it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X25-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 20 mm (5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 5 to 25 mm retract stroke to hit varying part heights during machine commissioning, using the 528 N both-way force to lift and place light electronic components.
Quickly adjust the mechanical stop screw to accommodate different box sizes on a packaging line without swapping out the entire cylinder hardware.
Use the fine-tune back-rod stop to test exact clamping depth on machining jigs, locking the 20 mm window exactly where the 739 N retract force secures the part.
Confirm this 20 mm adjustment window covers your target range. If you need less force, the 32 mm bore delivers 345 N each way at 0.5 MPa; if you need more, step up to the 50 mm bore for 825 N each way. If your end-position never changes after commissioning, a fixed-stroke SED cylinder is sufficient. Remember that the adjustable air cushion and mechanical stop screw only set the end limit and decelerate the load; they do not hold position on air loss, so you need an external rod lock for fail-safe holding. When replacing an ISO 15552 cylinder, match the 25 mm stroke, 20 mm window, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
The retract stroke is adjustable up to 20 mm via a stop screw on the back rod. The effective stroke range is 5 to 25 mm, which you set and lock mechanically during machine commissioning.
Because the rod exits both ends, the force is identical in both directions. It generates 528 N each way at 0.5 MPa, 739 N each way at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.