
The AirTAC SEJ Adjustable Cylinder SEJ40X250-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø40mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X250-100 is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable stroke. A rod exits both ends, yielding equal force in both directions—delivering 528 N each way at 0.5 MPa. The 100 mm adjustment window lets you dial the retract end down, providing an effective stroke range of 150 to 250 mm.
This cylinder uses a back-rod stop screw to set the mechanical end position, which you lock in place during commissioning. It features field-adjustable air cushions at both ends for deceleration and a PT1/4 port. This SKU omits the magnet, so it has no position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X250-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 150-250mm end position during setup. The 528N both-way force handles light clamping arms while you lock the stop screw precisely.
Adjust the retract stroke on packaging lines when switching to different carton heights. The double-rod design ensures identical push and pull speeds for smooth transfers.
Test multiple stop points on a new assembly fixture without swapping hardware. The back-rod adjustment allows rapid 100mm window shifts for prototype validation.
Confirm the 100 mm adjustment window covers your required end-position range. If you need less force, the adjacent 32 mm bore provides 345 N at 0.5 MPa; if you need more, step up to the 50 mm bore for 825 N. If your application never requires stroke changes, a fixed-stroke SED is sufficient. The air cushion and stop screw decelerate the load but do not hold position on air loss—for fail-safe holding, use an external rod lock. At 250 mm stroke, add external guides to manage side loads. Ensure your ISO 15552 replacement matches the 40 mm bore, 250 mm stroke, PT port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
The retract stroke adjusts over a 100 mm window. The effective stroke ranges from 150 mm to the nominal 250 mm. You set the exact end position using a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.