verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X250-50

The AirTAC SEJ Adjustable Cylinder SEJ40X250-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø40mm unit covers an effective stroke of 200–250mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke250 mm
  • Adjust window50 mm
  • Effective stroke200–250 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$93.48 $100.98Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X250-50

The AirTAC SEJ40X250-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window, yielding an effective stroke range of 200-250 mm. A rod exits both ends, ensuring the annulus area remains identical in both directions; this generates an equal force of 528 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.

A stop screw on the back rod mechanically shortens the retract stroke, which you dial in during commissioning and lock down to fix a precise end position. The cylinder features field-adjustable air cushions at both ends over a 30 mm cushion length to decelerate the load near stroke end. This SKU omits the magnet option, meaning it will not support CMSE or DMSE position sensors without modification.

Airtac SEJ Adjustable Cylinder SEJ40X250-50 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X250-50
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke250 mm
Adjustment window50 mm (200–250 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X250-50

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×250Nominal stroke length in mm.
-50Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X250-50 Is Used

tune

Packaging Flap Folding

Dial in the exact 200-250 mm retract stop to fold varying carton flap heights on a packaging line, using the equal 528 N both-way force to reliably crease cardboard without changing hardware.

precision_manufacturing

Press Fit Commissioning

Fine-tune the trial insertion depth of a light-duty bearing press, locking the back-rod stop screw once the perfect 200-250 mm position is found to guarantee repeatable mechanical stops.

Is the Airtac SEJ Adjustable Cylinder SEJ40X250-50 the Right Cylinder?

Verify that the 50 mm adjustment window safely covers your required end-position variance, allowing you to fine-tune the retract stroke from 200 mm up to the full 250 mm. If you need less force, the next bore down is 32 mm, providing 345 N both ways at 0.5 MPa; if you need more thrust, stepping up to a 63 mm bore yields 1402 N both ways at 0.5 MPa. When a fixed end position is sufficient and the adjustment range is unnecessary, a fixed-stroke SED cylinder is a simpler alternative.

Because the stroke is 250 mm, external guide rails are recommended to prevent side-load wear on the 16 mm rod and M12x1.25 rod-end thread. Note that a plain SEJ does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate the load, so for fail-safe holding you need an external rod lock or a BSED series cylinder. Ensure your ISO 15552 replacement matches the PT1/4 port, the chosen mounting from the Basic/FA/LB/TC/FTC/TCM1/TCM2 set, and the 0.15-1.0 MPa operating pressure range.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (50mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 50mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X250-50 FAQ

A stop screw on the rear protruding rod mechanically shortens the retract stroke. For the SEJ40X250-50, the 50 mm adjustment window lets you dial the effective stroke anywhere from 200 mm up to 250 mm, which you then lock in place for a precise end position.

Because it is a double-rod cylinder, the force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X250-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X250-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.