verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X30-10S

The AirTAC SEJ Adjustable Cylinder SEJ40X30-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 20–30mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke30 mm
  • Adjust window10 mm
  • Effective stroke20–30 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$73.01 $80.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X30-10S

The AirTAC SEJ40X30-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the output force is equal in both directions at 528 N each way at 0.5 MPa. The retract end uses a mechanical stop screw to dial in the exact end position, providing an effective stroke range of 20 to 30 mm without changing hardware.

This extruded aluminum barrel unit includes field-adjustable air cushions at both ends to manage kinetic energy. It carries the -S magnet option for position sensing and uses a PT1/4 port with a 16mm rod. The dual-rod design also resists torsional rotation, making it ideal for guided mechanisms in compact spaces.

Airtac SEJ Adjustable Cylinder SEJ40X30-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X30-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke30 mm
Adjustment window10 mm (20–30 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X30-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×30Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X30-10S Is Used

tune

Pick-and-Place End Tuning

Dial in the 20-30mm retract stop to perfectly time the pick height on a small electronic component handler, utilizing the 528 N both-way force.

swap_horiz

Packaging Changeover

Quickly adjust the mechanical stop to accommodate different carton fold depths on a packaging line without swapping out the entire cylinder body.

precision_manufacturing

Pneumatic Press Positioning

Set the precise 30mm stroke limit for a light-duty assembly press, using the equal both-way force to ensure consistent pressing depth.

Is the Airtac SEJ Adjustable Cylinder SEJ40X30-10S the Right Cylinder?

Verify the 10mm adjustment window covers your required 20-30mm range for commissioning or part changeover. If you need less force, step down to the 32mm bore offering 345 N at 0.5 MPa; if your load is heavier, step up to the 50mm bore delivering 825 N at 0.5 MPa. For fixed-position applications without the need for end-tuning, the standard SED double-rod cylinder is sufficient.

Remember that a plain SEJ does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate the load. For fail-safe holding, use an external rod lock. This ISO 15552 dimensionally interchangeable cylinder uses a PT1/4 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mountings.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X30-10S FAQ

The SEJ40X30-10S has a 10mm adjustment window, meaning the effective retract stroke can be mechanically dialed in from 20mm up to 30mm using the back-rod stop screw.

Because it is a double-rod cylinder, the force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X30-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X30-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.