
The AirTAC SE40 Standard Cylinder SE40X30 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 30mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X30 is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke actuation. It provides a robust 628 N push force at 0.5 MPa alongside a 528 N pull force, driven through a 16 mm hard-chrome piston rod. Because the square extruded aluminum barrel entirely eliminates external tie rods, the body mounts flush against machine frames, saving valuable space in compact assemblies.
This 40 mm bore unit features a field-adjustable pneumatic cushion at both ends, allowing technicians to dial in end-of-stroke deceleration and eliminate hard metal impacts. This specific SKU is configured without a sensor magnet, so position detection is not integrated out of the box. The standardized ISO 15552 footprint ensures seamless dimensional interchangeability with comparable profile cylinders during facility upgrades.
| Model | Airtac SE40 Standard Cylinder SE40X30 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Secures thin printed circuit boards onto the bed of a CNC drilling machine, utilizing the 628 N push force and 30 mm stroke to lock fragile panels in place without bowing the substrate.
Drives the short mechanical arms that tuck minor flaps on high-speed packaging lines, where the 30 mm stroke provides just enough travel to clear the carton path before the major flaps close.
Actuates a diverter gate at the nozzle of a chemical dispensing station, using the 528 N retract force to pull the shutter closed reliably against viscous fluid drag.
Selecting the SE40X30 is optimal for brief 30 mm movements requiring moderate thrust. If your assembly needs less force, stepping down to the 32 mm bore yields a 402 N push at 0.5 MPa, whereas upgrading to the 50 mm bore provides a 982 N push for heavier payloads. Since this is a double-acting cylinder, it will drift if air pressure is lost or the valve centers; applications requiring true load holding without live pressure must integrate an external pilot-operated check valve or utilize the BSE rod-lock variant. As a direct dimensional match per ISO 15552 standards, it shares identical mounting interfaces and PT1/4 porting with comparable profile cylinders.
Quick checklist
The SE40X30 generates 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X30 is built to strict ISO 15552 / VDMA 24562 dimensional standards, meaning its mounting holes, port sizes (PT1/4), and body profile are fully interchangeable with other standard ISO 15552 profile cylinders. Note that this specific SKU lacks a sensor magnet, so CMSE or DMSE position switches will not function on it without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.