
The AirTAC SEJ Adjustable Cylinder SEJ40X30-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 0–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X30-30S is a double-acting, double-rod ISO 15552 profile cylinder offering a mechanically adjustable stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 528 N each way at 0.5 MPa. The integrated magnet supports position sensing.
A stop screw on the back rod lets you dial the retract end over a 30 mm window, providing an effective stroke range of 0 to 30 mm. You can fine-tune the exact end position directly on the machine without swapping hardware. The extruded aluminum barrel contains no external tie rods, and field-adjustable air cushions at both ends decelerate the load near stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X30-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 30 mm (0–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 0-30 mm stop precisely during press setup to align a printing head, utilizing the 528 N both-way force to hold the registration gate firmly.
Adjust the retract stroke on the fly when switching carton sizes, using the 30 mm window to match new package heights without replacing the cylinder.
Fine-tune the exact drop distance for a fluid dispenser nozzle, locking the back-rod stop screw after finding the perfect 5 mm end position.
The 30 mm adjustment window is ideal for prototyping jigs or dialing in a precise 0 to 30 mm clamping distance. If you need less force, the 32 mm bore delivers 345 N both ways at 0.5 MPa; if you need more push, the 50 mm bore provides 825 N both ways. For fixed non-adjustable strokes, the SED series is sufficient. Note that this cylinder does not hold position on air loss; use a BSED or external rod lock for fail-safe holding. For ISO 15552 replacement matching, verify the 30 mm stroke, PT1/4 port, M12x1.25 rod thread, and desired mounting bracket from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
A mechanical stop screw on the rear rod lets you shorten the retract stroke over a 30 mm window, giving an effective stroke range of 0 to 30 mm. You set the exact end position and lock it in place.
Because the rod exits both ends, the force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.