
The AirTAC SEJ Adjustable Cylinder SEJ40X320-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 290–320mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X320-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window, yielding an effective stroke range of 290-320mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This provides an equal force of 528N each way at 0.5MPa, preventing speed discrepancies between extend and retract motions.
You dial in the retract end position via a stop screw on the back rod, locking it after setting the exact machine endpoint. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for precise position feedback. Standard features include field-adjustable air cushions at both ends and a PT1/4 port.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X320-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 320 mm |
| Adjustment window | 30 mm (290–320 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×320 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 528N of equal both-way force to shift press tooling. The 30mm stroke adjustment dials in the exact 290-320mm clearance needed for different die heights during setup.
Handles product diverting on packaging lines. The back-rod stop screw sets the precise retract endpoint to match varying carton lengths without re-mounting hardware.
Applies 739N at 0.7MPa for pressing lab samples. The adjustable end lets operators fine-tune the exact 290-320mm dispense depth on the machine during commissioning.
The 30mm adjustment window lets you fine-tune the retract endpoint over a 290-320mm range without swapping hardware, ideal for trial positioning or matching a variable stop. If 528N at 0.5MPa is insufficient, stepping up to the 63mm bore yields 1402N; if you are oversizing, the 32mm bore provides 345N. If your end position never changes, a fixed-stroke SED cylinder is a simpler choice.
Note that the air cushion and stop screw only decelerate the load and set the mechanical end; they do not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED series cylinder. At 320mm stroke, ensure external guides support the load to prevent side-loading on the rod.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 30mm. The effective stroke range is 290-320mm, which you set and lock on the machine during commissioning.
Because the rod exits both ends, force is equal in both directions: 528N at 0.5MPa, 739N at 0.7MPa, and a maximum of 108kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.