verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X40-10

The AirTAC SEJ Adjustable Cylinder SEJ40X40-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 30–40mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke40 mm
  • Adjust window10 mm
  • Effective stroke30–40 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$70.22 $77.72Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X40-10

The AirTAC SEJ40X40-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window, allowing you to dial the retract end from 30 to 40mm for exact positioning. The rear rod also provides a convenient mounting point for a cam or flag.

This extruded aluminum barrel design omits external tie rods for a clean profile. A stop screw on the back rod mechanically sets the end position—simply lock it after tuning to match a machine stop perfectly. It includes field-adjustable air cushions at both ends (30mm cushion length) to decelerate the load near stroke end, though it will not hold position on air loss.

Airtac SEJ Adjustable Cylinder SEJ40X40-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X40-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke40 mm
Adjustment window10 mm (30–40 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X40-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×40Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X40-10 Is Used

tune

Dispenser Stroke Tuning

Dial in the exact 30-40mm retract position on a fluid dispensing head, using the 528N both-way force to cleanly pull away without repositioning hardware.

swap_horiz

Part Height Changeover

Adapt a small clamping station to varying part heights by adjusting the back-rod stop screw, matching the new profile precisely on the machine.

precision_manufacturing

Probe Contact Setup

Fine-tune the mechanical end during commissioning so a testing probe touches a PCB at the exact 40mm limit, locking the stop screw once set.

Is the Airtac SEJ Adjustable Cylinder SEJ40X40-10 the Right Cylinder?

Confirm the 10mm adjustment window covers your required 30-40mm end-position range before ordering. If you need less force, the adjacent 32mm bore provides 345N both ways at 0.5MPa; if your application demands more thrust, step up to the 50mm bore for 825N both ways. If your stroke length never varies, a fixed-stroke SED cylinder is sufficient. For fail-safe load holding during air loss, pair this cylinder with an external rod lock or a BSED unit. When replacing an ISO 15552 unit, match the 40mm bore, 40mm nominal stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X40-10 FAQ

The retract stroke can be dialed up to 10mm, giving an effective stroke range of 30 to 40mm. You set the exact end position using a stop screw on the back rod, then lock it in place.

Because the rod exits both ends, force is identical in both directions: 528N at 0.5MPa, 739N at 0.7MPa, and a maximum of 108kgf at 1.0MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X40-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X40-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.