
The AirTAC SE40 Standard Cylinder SE40X40 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 40mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X40 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush and resists corrosion in demanding environments.
Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts at operating speeds up to 800 mm/s. This specific SKU lacks the built-in magnet option, meaning it is not wired for CMSE or DMSE position sensing without modification.
| Model | Airtac SE40 Standard Cylinder SE40X40 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 628 N of extend force at 0.5 MPa to secure aluminum workpieces against a CNC machining center tombstone, utilizing the 40 mm stroke to clear the work zone quickly.
Drives a mechanical arm at up to 800 mm/s to tuck minor flaps on a packaging line, with adjustable end cushions absorbing the kinetic energy of the 40 mm rapid traverse.
Actuates a diverter arm on a bottling conveyor, using its compact tie-rod-free profile body to fit neatly within the 50 mm machine frame gap without snagging passing traffic.
If your application requires less force, stepping down to the 32 mm bore yields 402 N of push at 0.5 MPa, whereas upgrading to the 50 mm bore provides 982 N. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, consider the BSE rod lock variant. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing standardized mounting hardware and port dimensions (PT1/4).
Quick checklist
The SE40X40 generates 628 N push and 528 N pull at 0.5 MPa, 879 N push at 0.7 MPa, and a maximum of 128 kgf at 1.0 MPa. It features a 16 mm rod with an M12x1.25 rod-end thread and a PT1/4 port.
Yes, the SE40X40 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and pilot dimensions. Its adjustable air cushions at both ends can be fine-tuned to match your existing machine's cycle speeds.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.