
The AirTAC SEJ Adjustable Cylinder SEJ40X40-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 30–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X40-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust is equal both ways at 528 N (0.5 MPa). A stop screw on the back rod provides a 10 mm retract window, setting the effective stroke range from 30 to 40 mm.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration over the 30 mm cushion length. The -S magnet option enables position detection with CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X40-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 10 mm (30–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 30 to 40 mm retract stop for fluid dispensing nozzles, utilizing the 528 N both-way force to lift consistently without repositioning hardware.
Adapt a packaging machine to different carton heights instantly by adjusting the back-rod stop screw, using the equal push and pull forces for reliable motion.
Trial exact end positions on a test rig over the 10 mm window, locking the back rod mechanically once the optimal travel is found for the 40 mm stroke.
Confirm the 10 mm adjustment window covers your exact end-position tuning needs. If you need less force, the 32 mm bore provides 345 N both ways at 0.5 MPa; if you need more, step up to the 50 mm bore for 825 N. If your stroke is fixed, a standard SED cylinder is sufficient. For fail-safe position holding on air loss, use a BSED or external rod lock. Match ISO 15552 replacements by verifying the 40 mm bore, 30-40 mm stroke, PT1/4 port, and magnet option.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 10 mm window. This allows the effective stroke to be dialed from 30 mm up to 40 mm, which is ideal for fine-tuning end positions on the machine without changing hardware.
Because it is a double-rod cylinder, the force is equal in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.