
The AirTAC SEJ Adjustable Cylinder SEJ40X40-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 20–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X40-20S is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 528 N each way at 0.5 MPa. The integrated -S magnet enables position detection with CMSE reed or DMSE electronic sensors.
This unit features a 20 mm adjustable stroke window, letting you dial the retract end from 20 mm up to the nominal 40 mm. A mechanical stop screw on the back rod sets the precise end-position, which you lock down after fine-tuning. It uses a PT1/4 port, a 16 mm rod with an M12x1.25 thread, and adjustable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X40-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 20 mm (20–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 20-40 mm retract position for a fluid dispensing head, using the 528 N both-way force to lift a valve consistently without overtravel.
Adjust the mechanical stop on the fly when switching carton sizes, avoiding hardware swaps while the double-rod design maintains equal push and pull speeds.
Fine-tune the end position during machine commissioning to seat delicate electronic components precisely, locking the back-rod screw once the optimal depth is found.
Verify the 20 mm adjustment window covers your required positioning range, giving an effective 20 to 40 mm stroke. If you need less force, the adjacent 32 mm bore provides 345 N at 0.5 MPa; stepping up to the 50 mm bore yields 825 N at 0.5 MPa. If your machine never requires stroke changes, a fixed-stroke SED saves complexity. Remember this cylinder relies on air pressure; the stop screw and adjustable cushion decelerate the load but do not lock it. For fail-safe position holding on air loss, add an external rod lock. Match ISO 15552 replacements by confirming the 40 mm bore, PT1/4 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. You can adjust the effective stroke anywhere from 20 mm up to the nominal 40 mm, then lock the screw in place.
Because it is a double-rod cylinder, the force is equal in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.