
The AirTAC SEJ Adjustable Cylinder SEJ40X40-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 10–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X40-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end down, yielding an effective stroke range of 10 to 40mm for precise commissioning. Because the rod exits both ends, the annular area is identical in both directions, delivering an equal force of 528N each way at 0.5 MPa.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to decelerate the load near the stroke limits. The -S magnet option enables position sensing with CMSE reed or DMSE electronic sensors. It supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X40-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 30 mm (10–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Fine-tune the 10-40mm retract stop on a small stamping press to align progressive dies, utilizing the 528N both-way force to hold the tooling securely.
Dial in the exact end position when switching carton sizes on a packaging line, using the 30mm window to adapt the stroke without swapping hardware.
Commission a gripper arm by mechanically adjusting the retract end to match a precise pick height, relying on the equal push and pull forces for smooth motion.
Confirm the 30mm adjustment window covers your required end-position range, providing a 10-40mm effective stroke. For sizing, if 528N at 0.5 MPa is excessive, step down to the 32mm bore (345N both ways); if you need more push, step up to the 50mm bore (825N both ways). If your machine never requires stroke tuning, a fixed-stroke SED40X40 is sufficient. For fail-safe load holding on air loss, add an external rod lock, as the cushions here only decelerate and do not lock. Ensure your ISO 15552 replacement matches the 40mm bore, 40mm stroke, PT1/4 port, and chosen mounting.
Quick checklist
The 30mm adjustment window allows you to mechanically shorten the retract stroke via a back-rod stop screw. The effective stroke range is 10 to 40mm, which you lock in place during machine commissioning.
Because the rod exits both ends, force is equal in both directions: 528N at 0.5 MPa, 739N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.