
The AirTAC SEJ Adjustable Cylinder SEJ40X400-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø40mm unit covers an effective stroke of 300–400mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X400-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window, yielding an effective stroke range of 300-400mm. A rod exits both ends, ensuring the annulus area remains identical in both directions for an equal force output of 528 N each way at 0.5 MPa.
You dial in the retract end-position via a mechanical stop screw on the back rod, locking it after setting to perfectly match a machine stop. The extruded aluminum barrel omits external tie rods, and an integrated magnet supports CMSE reed and DMSE electronic sensors for mid-stroke tracking.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X400-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 400 mm |
| Adjustment window | 100 mm (300–400 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×400 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact clamping force and position for raw castings on a CNC machining center, utilizing the 528 N both-way force and 100mm retract adjustment to adapt to varying part heights.
Fine-tune the retract stop on a packaging line diverter to handle varying box widths without swapping hardware, locking the back rod stop screw precisely at the required clear position.
Commission a light-duty assembly press by adjusting the effective stroke from 300 to 400mm, finding the exact travel distance to seat bearings without over-stressing the 108 kgf max limit.
Confirm this 100mm adjustment window covers your required end-position variance. If you need less fine-tuning range, a fixed-stroke SED cylinder is sufficient. For sizing neighbors: a bore 32 provides 345 N both ways at 0.5 MPa, while a bore 50 offers 825 N, compared to this bore 40's 528 N. The plain SEJ does not hold position on air loss; the adjustable air cushion and stop screw only set the mechanical end and decelerate near stroke end. For fail-safe holding, use an external rod lock or BSED. At 400mm stroke, add external guides to manage side loads. Ensure your ISO 15552 replacement matches the PT1/4 port, M12x1.25 rod thread, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 100mm. For the SEJ40X400-100S, this gives an effective stroke range of 300-400mm, which you lock in place after setting the exact end-position.
Because it is a double-rod cylinder, the force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.