
The AirTAC SEJ Adjustable Cylinder SEJ40X450-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø40mm unit covers an effective stroke of 350–450mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X450-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100 mm adjustable stroke window. You can dial the retract end from 350 mm up to 450 mm, allowing precise in-machine commissioning without swapping hardware. Because a rod exits both ends, the annulus area is symmetrical, yielding equal force in both directions at 528 N (0.5 MPa) and 739 N (0.7 MPa).
This extruded aluminum barrel unit omits external tie rods and includes field-adjustable air cushions at both ends to decelerate the load near stroke ends. The 16 mm rod uses an M12x1.25 thread, and the PT1/4 port handles the pneumatic supply. Note this SKU lacks a magnet, so CMSE or DMSE position sensors cannot be fitted without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X450-100 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 450 mm |
| Adjustment window | 100 mm (350–450 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 100 mm retract window to precisely strike packages of varying heights on a sorting conveyor, using the 739 N both-way force at 0.7 MPa to push reliably without damaging goods.
Set the exact 350-450 mm end position during machine commissioning to match different part thicknesses, locking the back-rod stop screw once the ideal clamping distance is found.
Confirm the 350-450 mm effective range covers your variable-stop or changeover requirement. For sizing, the adjacent SEJ32 bore yields 345 N at 0.5 MPa, while stepping up to the SEJ50 bore provides 825 N at 0.5 MPa both ways. If you do not require end-position tuning, a fixed-stroke SED40X450 offers identical equal-force mechanics in a shorter body. For stroke lengths at or above 300 mm, external guide rails are recommended to prevent rod side-loading and premature seal wear.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 450 mm nominal stroke, 100 mm adjustment window, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember that the adjustable cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, specify an external rod lock.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke over a 100 mm window. The effective stroke range is 350 mm to 450 mm. You dial the end position to match your machine, then lock the screw.
Because it is a double-rod cylinder, force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.