
The AirTAC SE40 Standard Cylinder SE40X450 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 450mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X450 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 40mm bore and 450mm stroke. It provides a robust 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa, making it well-suited for mid-range industrial positioning tasks. The square extruded aluminum barrel omits external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames without creating pinch points or snag hazards.
This unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to dial in the end-of-stroke deceleration via a set screw to prevent hard impacts during high-speed cycles. As this specific SKU lacks the -S magnet code, it is not equipped for electronic position sensing out of the box, relying instead on mechanical travel limits. The integrated 30mm cushion length and PT1/4 porting ensure reliable airflow for its 30-800 mm/s operating speed range.
| Model | Airtac SE40 Standard Cylinder SE40X450 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
With 628 N of push force at 0.5 MPa and a 450mm reach, this cylinder easily extends diverter arms on packaging conveyors to reroute cartons into sorting lanes without requiring external air reservoirs.
The 450mm stroke allows deep reach into a stamping press area, using the 879 N push force at 0.7 MPa to hold light-gauge sheet metal blanks firmly in place during a secondary bending or piercing operation.
Integrated into a palletizing end effector, the tie-rod-free extruded profile saves space and provides the precise 450mm extension needed to push empty pallets into a staging zone before the stacking sequence begins.
When sizing this actuator, consider stepping down to a 32mm bore if your application only requires 402 N of push at 0.5 MPa, or moving up to a 50mm bore for a substantial increase to 982 N. Because the 450mm stroke creates a long lever arm on the 16mm rod, side loads can induce significant bending moments on the rod bearing; an external guide rail is strongly recommended to prevent premature wear and sticking. As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a direct replacement for other profile cylinders matching the 40mm bore, 450mm stroke, PT1/4 port, and your chosen mounting accessory. Note that the adjustable air cushion only decelerates the piston near the stroke ends and will not hold a load if air pressure is lost.
Quick checklist
This 40mm bore cylinder generates 628 N of push force and 528 N of pull force at 0.5 MPa, increasing to 879 N of push at 0.7 MPa, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes, the SE40X450 is dimensionally interchangeable with any standard ISO 15552 profile cylinder sharing the same 40mm bore and 450mm stroke specifications. However, it is a standard double-acting cylinder, so the adjustable cushions only decelerate the piston at stroke ends and will not hold a load if air pressure is lost or the valve is centered.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.