verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X50-10

The AirTAC SEJ Adjustable Cylinder SEJ40X50-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 40–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke50 mm
  • Adjust window10 mm
  • Effective stroke40–50 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$70.22 $77.72Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X50-10

The AirTAC SEJ40X50-10 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. A rod exits both ends, yielding identical annulus areas so output force is perfectly symmetrical. The retract stroke is mechanically adjustable via a stop screw on the back rod, covering a 10 mm window to give an effective stroke range of 40 to 50 mm.

This extruded aluminum barrel design omits external tie rods for a clean profile. It features field-adjustable air cushions at both ends to manage deceleration over the 30 mm cushion length. This SKU ships without a magnet, so it does not support CMSE or DMSE position sensors. Porting is PT1/4, and the 16 mm rod uses an M12x1.25 end thread.

Airtac SEJ Adjustable Cylinder SEJ40X50-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X50-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke50 mm
Adjustment window10 mm (40–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X50-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×50Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X50-10 Is Used

tune

Gripper Jaw Calibration

Dial in the exact 40-50 mm closing distance on automated gripper jaws, using the 528 N both-way force to securely clamp varying part geometries during commissioning.

swap_horiz

Product Changeover Stops

Adjust the mechanical stop screw to accommodate different package heights on a packaging line, shifting the retract endpoint up to 10 mm without swapping hardware.

precision_manufacturing

Trial Spot Welding

Fine-tune the electrode approach on a small spot welding fixture, leveraging the equal extend and retract forces to maintain consistent pressure against the workpiece.

Is the Airtac SEJ Adjustable Cylinder SEJ40X50-10 the Right Cylinder?

Verify the 10 mm adjustment window safely covers your required end-position variance for the 40-50 mm range. If you need less force, step down to the 32 mm bore (345 N at 0.5 MPa). If your application requires more push or pull, step up to the 50 mm bore (825 N at 0.5 MPa). If your machine never requires stroke fine-tuning, a fixed-stroke SED cylinder provides the same double-rod output more simply. For a true ISO 15552 replacement match, confirm the 50 mm nominal stroke, PT1/4 port, and your required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the stop screw and air cushions only set the mechanical end and decelerate the load; they do not hold position on air loss.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X50-10 FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 10 mm window. This allows you to dial the effective stroke down from 50 mm to 40 mm to perfectly match your machine's end position, which you then lock in place.

Because it is a double-rod cylinder, the force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X50-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X50-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.