verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X50-20

The AirTAC SEJ Adjustable Cylinder SEJ40X50-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke50 mm
  • Adjust window20 mm
  • Effective stroke30–50 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$70.22 $77.72Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X50-20

The AirTAC SEJ40X50-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. You can dial the retract end from 30mm up to the 50mm nominal stroke.

A stop screw on the back rod mechanically sets the end position, allowing precise on-machine fine-tuning without hardware changes. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the load near stroke completion.

Airtac SEJ Adjustable Cylinder SEJ40X50-20 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X50-20
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke50 mm
Adjustment window20 mm (30–50 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X50-20

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×50Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X50-20 Is Used

settings

Machine Changeover

Dial in the 30-50mm effective stroke to match new part heights during product changeovers, using the 528 N both-way force to shift light tooling.

precision_manufacturing

Trial Positioning

Fine-tune the retract end-stop during prototyping to find the exact 30-50mm contact point for a delicate assembly press.

straighten

Cam Timing

Use the rear exiting rod to carry a cam, mechanically adjusting the 20mm window to synchronize a packaging flap mechanism.

Is the Airtac SEJ Adjustable Cylinder SEJ40X50-20 the Right Cylinder?

This 20mm adjustment window is ideal for tuning exact end positions or accommodating part height changeovers. If you need less force, the 32mm bore provides 345 N at 0.5 MPa both ways; if your load is heavier, the 50mm bore offers 825 N at 0.5 MPa. For fixed-stroke applications without positioning flexibility, the SED series is sufficient.

This SKU lacks a magnet, so position sensing is unavailable. Note that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. The PT1/4 port and M12x1.25 rod thread match standard ISO 15552 mounting dimensions.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X50-20 FAQ

A stop screw on the back rod lets you mechanically dial the retract stroke over a 20mm window, giving an effective stroke range of 30-50mm. You lock the screw after setting the desired end position.

Because it is a double-rod cylinder, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X50-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X50-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.