
The AirTAC SEJ Adjustable Cylinder SEJ40X50-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X50-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm retract adjustment window, yielding an effective stroke range of 30-50mm. A rod exits both ends, ensuring the annular area is identical in both directions. This provides an equal output force of 528 N each way at 0.5 MPa. Fitted with a magnet, it supports CMSE reed and DMSE electronic sensors for position tracking.
You dial in the exact end position using a stop screw on the back rod, then lock it during commissioning. The extruded aluminum barrel has no external tie rods, and field-adjustable air cushions at both ends decelerate the load near the stroke ends without acting as a mechanical brake.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X50-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 20 mm (30–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30-50mm retract end to perfectly time a packaging flap mechanism, using the 528 N both-way force to consistently seal cartons of varying heights.
Quickly reposition a product stop on a conveyor during format changeover, adjusting the stroke by up to 20mm without swapping out the entire cylinder hardware.
Fine-tune the engagement depth of a 40mm bore press tool during commissioning, locking the back-rod stop screw precisely once the optimal end position is found.
Confirm the 20mm adjustment window covers your positioning range. If you need less force, the adjacent 32mm bore delivers 345 N both ways at 0.5 MPa; if your load requires more, step up to the 50mm bore for 825 N. If the end position never changes after setup, a fixed-stroke SED cylinder is sufficient. Remember that a plain SEJ does not hold position on air loss; the cushions only decelerate, so for fail-safe holding point to a BSED or external rod lock. When replacing an ISO 15552 unit, match the 50mm stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
The 20mm adjustment window lets you dial the retract end from 30mm up to the nominal 50mm. You set the exact end position via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.