
The AirTAC SEJ Adjustable Cylinder SEJ40X50-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X50-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust matches in both directions at about 528 N each way at 0.5 MPa. You can dial the retract end-position up to 30mm, giving an effective stroke range of 20-50mm.
This extruded aluminum barrel design omits external tie rods for a clean profile. The rear rod houses a mechanical stop screw; set your exact end position on the machine, then lock it down. It includes field-adjustable air cushions at both ends (30mm cushion length) to decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X50-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 30 mm (20–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30mm retract window to match new part heights during format changeovers, delivering 528N of equal both-way force at 0.5MPa to shift light tooling.
Set a precise mechanical stop for carton flow on a packaging conveyor, using the 20-50mm effective range to perfect the gap without swapping hardware.
Use the adjustable end-stop to test pick-and-place trajectories in a lab jig, locking the 16mm rear rod once the exact 50mm travel is found.
This 40mm bore delivers 528 N (0.5 MPa) and 739 N (0.7 MPa) of both-way force. If your application needs less thrust, the 32mm bore provides 345 N at 0.5 MPa; for heavier loads, step up to the 50mm bore which provides 825 N at 0.5 MPa. If you do not require variable positioning, a fixed-stroke SED provides a simpler alternative.
This SKU lacks a magnet, so it cannot host CMSE or DMSE sensors. The air cushion and mechanical stop screw decelerate the load and set the end position, but a plain SEJ does not hold position on air loss—for fail-safe holding, specify an external rod lock. Ensure your ISO 15552 replacement matches the 50mm nominal stroke, 30mm window, PT1/4 port, and M12x1.25 rod thread.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 30mm window. The effective stroke range is 20-50mm. You dial the end position during commissioning and lock it in place.
Because the rod exits both ends, the force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.