
The AirTAC SEJ Adjustable Cylinder SEJ40X50-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø40mm unit covers an effective stroke of 10–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X50-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is exactly equal in both directions at 528 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can dial the retract end position down from the 50 mm nominal stroke to a 10 mm minimum, giving an effective stroke range of 10-50 mm.
This extruded aluminum barrel design omits external tie rods and includes field-adjustable air cushions at both ends to decelerate the load near stroke extremes. It uses a PT1/4 port, a Ø16 mm rod with an M12x1.25 thread, and operates at speeds of 30-800 mm/s. This specific SKU lacks a magnet, meaning it is not ready for CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X50-40 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 40 mm (10–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10-50 mm retract stop to precisely set the 528 N clamping force on delicate circuit boards during press fitment, allowing micro-adjustments without swapping hardware.
Use the 40 mm adjustment window on the M12x1.25 threaded rod to test multiple extend lengths for drilling jigs, finding the exact optimal end point before final lockdown.
Verify the 40 mm adjustment window covers your required positioning range, providing a 10-50 mm effective stroke for on-machine fine-tuning. If you need less force, stepping down to the 32 mm bore gives 345 N both ways at 0.5 MPa; if you need more push, the 50 mm bore provides 825 N. If the stroke never needs changing after commissioning, a fixed-stroke SED cylinder is a simpler choice. Note that the adjustable cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss, so an external rod lock is required for fail-safe holding. When replacing an ISO 15552 cylinder, match the 40 mm bore, 50 mm stroke, PT1/4 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
The cylinder has a 40 mm adjustment window via a stop screw on the back rod. This lets you mechanically dial the retract stroke down from the 50 mm nominal maximum, giving an effective stroke range of 10-50 mm for precise end-position tuning.
Because it is a double-rod cylinder, the force is identical in both extend and retract directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.