
The AirTAC SEJ Adjustable Cylinder SEJ40X50-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø40mm unit covers an effective stroke of 10–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X50-40S is a double-acting, double-rod ISO 15552 profile cylinder with a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is perfectly balanced.
The rear stop screw lets you dial the retract end over a 40 mm window, shrinking the effective stroke down to 10 mm. Because the barrel is an extruded aluminum profile rather than a tie-rod build, it accepts standard ISO 15552 mounts cleanly. The included -S magnet enables position feedback via CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X50-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 40 mm (10–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the retract stroke from 50 mm down to 10 mm to set exact gripper jaw opening during machine commissioning without machining new spacers.
Adjust the back-rod stop screw on the fly to accommodate different product heights on a packaging conveyor, using the reliable 528 N both-way force.
Test exact part insertion depths on an assembly fixture by tweaking the 40 mm window, then lock the stop screw for repeatable 739 N positioning.
Verify the 40 mm adjustment window covers your positioning range, letting you fine-tune the retract stop from 10 to 50 mm on the machine. If you need less force, the 32 mm bore drops output to 345 N at 0.5 MPa; if you need more, stepping up to the 50 mm bore yields 825 N both ways. If you never alter the end position after commissioning, a fixed-stroke SED saves complexity. Remember the adjustable air cushion only decelerates the load near stroke end—it does not hold position on air loss. To replace a cylinder, match the 50 mm nominal stroke, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The SEJ40X50-40S features a 40 mm adjustment window via a stop screw on the rear rod. You can mechanically dial the effective retract stroke anywhere from 10 mm up to the full 50 mm nominal stroke.
Because it is a double-rod cylinder, force is equal in both directions. It generates 528 N at 0.5 MPa, 739 N at 0.7 MPa, and reaches a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.