
The AirTAC SEJ Adjustable Cylinder SEJ40X50-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø40mm unit covers an effective stroke of 0–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X50-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annular areas so output force is perfectly balanced at 528 N each way at 0.5 MPa. The 50 mm retract stop-screw lets you dial the effective stroke down from 50 mm to 0 mm without swapping hardware.
The -S magnet enables CMSE reed and DMSE electronic sensors for precise end-of-travel detection. Adjustable air cushions at both ends decelerate the load near stroke completion.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X50-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 50 mm (0–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 0-50 mm retract window to set exact upper-die heights during stamping press commissioning, utilizing the 528 N both-way force for stable clamping.
Adjust the mechanical stop to match different carton sizes on a packaging line without changing cylinder mounts, relying on the equal extend and retract forces.
Find the exact contact point for material crush tests by turning the back-rod stop screw, locking it once the 50 mm travel range is perfectly set.
Confirm the 50 mm adjustment window covers your positioning range. If you need less force, the 32 mm bore delivers 345 N both ways at 0.5 MPa; if you need more, step up to the 50 mm bore for 825 N. If the stroke never needs field tuning, a fixed-stroke SED avoids the extra length. This cylinder uses a PT1/4 port and M12x1.25 rod thread. Remember, a plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end. For fail-safe holding, use an external rod lock.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 0 to 50 mm. You set the exact end-position on the machine, then lock the screw.
Because the double-rod design creates equal annular areas, force is identical both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.