verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X55-10S

The AirTAC SEJ Adjustable Cylinder SEJ40X55-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 45–55mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke55 mm
  • Adjust window10 mm
  • Effective stroke45–55 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$75.34 $82.84Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X55-10S

The AirTAC SEJ40X55-10S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is perfectly balanced at about 528 N each way at 0.5 MPa. The extruded aluminum barrel provides ISO 15552 dimensional interchangeability without external tie rods.

This variant features a 10 mm adjustable stroke window, letting you mechanically dial the retract end from 45 to 55 mm via a back-rod stop screw to nail down exact machine positions. It includes a magnet for CMSE reed or DMSE electronic sensors, uses a PT1/4 port, and relies on field-adjustable air cushions at both ends to decelerate the load smoothly.

Airtac SEJ Adjustable Cylinder SEJ40X55-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X55-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke55 mm
Adjustment window10 mm (45–55 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X55-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×55Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X55-10S Is Used

tune

Sensor Flag Calibration

Dial the 10 mm retract window to perfectly align a DMSE electronic sensor flag on a 528 N assembly press, ensuring the cam triggers at the exact 45-55 mm travel point.

swap_horiz

Product Changeover

Quickly adjust the end stop to accommodate varying PCB widths on a conveyor line, using the equal both-way force to consistently push 55 mm without re-mounting hardware.

precision_manufacturing

Trial Positioning

Fine-tune the mechanical lower stop during machine commissioning on a clamping fixture, testing grip positions within the 10 mm window before locking the screw.

Is the Airtac SEJ Adjustable Cylinder SEJ40X55-10S the Right Cylinder?

Verify the 10 mm adjustment window covers your required end-position range; for tighter or wider tuning, step to a different adjust code. If you need less force, the adjacent 32 mm bore provides 345 N at 0.5 MPa both ways. If your payload is heavier, the 63 mm bore jumps to 1402 N. If the stroke never varies after commissioning, a fixed-stroke SED saves cost and length. This plain SEJ does not hold position on air loss; the stop screw and cushions only set the mechanical end and decelerate, so specify an external rod lock for fail-safe holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X55-10S FAQ

A stop screw on the rear rod mechanically shortens the retract stroke over a 10 mm window. You can dial the effective stroke from 45 mm up to 55 mm, then lock the screw in place for precise end-position tuning.

Because it is a double-rod cylinder, force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X55-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X55-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.