
The AirTAC SEJ Adjustable Cylinder SEJ40X60-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 30–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X60-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. You can dial the retract end from 30 mm up to the 60 mm nominal stroke, allowing precise mechanical fine-tuning of the end position directly on the machine without swapping hardware.
This 40 mm bore unit uses a PT1/4 port and a 16 mm rod with an M12x1.25 thread. It includes a magnet for CMSE reed or DMSE electronic sensors, and the extruded aluminum barrel design omits external tie rods. The retract stop mechanism uses a back-rod stop screw that you lock after setting, while field-adjustable air cushions at both ends manage deceleration over the 30 mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X60-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 30 mm (30–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 30-60 mm retract stroke to perfectly match print head pressure on variable-thickness packaging, utilizing the equal 528 N both-way force for stable contact and release.
Switch between different carton sizes by adjusting the back-rod stop screw on the fly, avoiding hardware swaps while the double-rod maintains equal push and pull forces.
Fine-tune the exact pick-up height during machine commissioning, locking the 16 mm rod's stop screw once the optimal 30-60 mm position is found for delicate component placement.
Verify the 30 mm adjustment window covers your required positioning range, giving an effective stroke of 30-60 mm. If you need less force, stepping down to the 32 mm bore yields 345 N at 0.5 MPa both ways; if you need more, stepping up to the 50 mm bore provides 825 N at 0.5 MPa both ways. If the end position never needs tuning after commissioning, a fixed-stroke SED is sufficient. For a direct ISO 15552 replacement, match the 40 mm bore, 60 mm stroke, PT1/4 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2 (FB/CA/CB/CR are omitted). Note that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss, so consider an external rod lock for fail-safe holding.
Quick checklist
The 30 mm adjustment window allows you to dial the retract stroke from 30 mm up to the nominal 60 mm. You set the exact end position using a stop screw on the back rod, then lock it in place.
Because the rod exits both ends, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.