
The AirTAC SEJ Adjustable Cylinder SEJ40X70-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 50–70mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X70-20 is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable retract window, yielding an effective stroke range of 50 to 70 mm. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
You mechanically dial in the end position via a stop screw on the back rod, then lock it down—ideal for hitting a precise stop without swapping hardware. This SKU lacks a magnet (-S), so it cannot host CMSE or DMSE sensors. Adjustable air cushions at both ends provide controlled deceleration over the 30 mm cushion length, operating between 30 and 800 mm/s.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X70-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 70 mm |
| Adjustment window | 20 mm (50–70 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50-70 mm retract window to precisely set a 528 N pressing depth for lightweight assembly housings without machining new spacers.
Quickly adjust the end stop to accommodate varying package heights on a conveyor sorting line, leveraging the equal 739 N both-way force.
Fine-tune the end-of-stroke contact point during machine commissioning to find the exact clamping location before locking the back rod.
Verify the 20 mm adjustment window covers your required end-position range; if you need less than 50 mm of travel, a fixed-stroke SED might suffice. For sizing, the neighboring 32 mm bore yields 345 N at 0.5 MPa, while stepping up to the 50 mm bore provides 825 N—use the latter if your 739 N at 0.7 MPa is insufficient. Remember that the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, specify a BSED or an external rod lock. When replacing an ISO 15552 cylinder, match the 40 mm bore, 70 mm stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 20 mm. This gives an effective stroke range of 50 to 70 mm, which you set and lock on the machine without changing the cylinder hardware.
Because the rod exits both ends, the force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.