
The AirTAC SEJ Adjustable Cylinder SEJ40X75-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 55–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X75-20S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A back-rod stop screw lets you dial in the end position over a 20 mm window, giving an effective stroke range of 55 to 75 mm.
This extruded-aluminum ISO 15552 cylinder includes a built-in magnet for CMSE reed or DMSE electronic sensors. It features field-adjustable air cushions at both ends to decelerate the load near the stroke limits and uses an M12x1.25 rod thread with PT1/4 ports. The mechanical stop screw sets the physical end position but does not lock the load on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X75-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 20 mm (55–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20 mm retract window to precisely set the 528 N contact force when seating bearings or pins during machine commissioning.
Adjust the effective stroke from 55 to 75 mm to match different carton heights without changing hardware, using equal both-way force for push and pull actions.
Fine-tune the stopping position of printed circuit boards on a conveyor line, using the -S magnet with a DMSE sensor to confirm retraction.
Confirm the 20 mm adjustment window covers your required end-position tolerance. If you need less force, the 32 mm bore neighbor provides 345 N both ways at 0.5 MPa; if you need more, step up to the 50 mm bore for 825 N both ways. For fixed-position applications without fine-tuning, a standard SED double-rod cylinder is sufficient. To replace an ISO 15552 unit, match the 40 mm bore, 75 mm nominal stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). For fail-safe position holding on air loss, use an external rod lock, as the adjustable cushion is not a brake.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. You can set the effective stroke anywhere from 55 mm up to the full 75 mm, then lock the screw in place for precise end-position tuning.
Because it is a double-rod cylinder, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa. It is dimensionally interchangeable per ISO 15552 / VDMA 24562.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.