verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X75-30

The AirTAC SEJ Adjustable Cylinder SEJ40X75-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 45–75mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke75 mm
  • Adjust window30 mm
  • Effective stroke45–75 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$72.55 $80.05Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X75-30

The AirTAC SEJ40X75-30 is a double-acting, double-rod ISO 15552 profile cylinder. A stop screw on the back rod lets you dial the retract end up to 30 mm shorter, providing an effective stroke range of 45-75 mm.

This extruded aluminum barrel design omits external tie rods for a clean profile. It features field-adjustable air cushions at both ends to decelerate the load near the stroke limits. This SKU lacks a magnet, so it does not support CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ40X75-30 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X75-30
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke75 mm
Adjustment window30 mm (45–75 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X75-30

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×75Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X75-30 Is Used

tune

Dispenser Stroke Tuning

Dial in the exact 45-75 mm retract position for a fluid dispensing head, using the 528 N both-way force to press consistently without over-traveling.

swap_horiz

Packaging Changeover

Adjust the retract stop on the fly when switching carton sizes on a packaging conveyor, avoiding hardware swaps while maintaining precise motion control.

Is the Airtac SEJ Adjustable Cylinder SEJ40X75-30 the Right Cylinder?

Confirm the 30 mm adjustment window covers your end-position tuning needs. If you need less force, the 32 mm bore provides 345 N each way at 0.5 MPa; if you need more, step up to the 50 mm bore for 825 N. If your stroke never varies, a fixed-stroke SED cylinder is sufficient. For fail-safe position holding on air loss, use an external rod lock, as the cushion and stop screw are not brakes. When replacing an ISO 15552 unit, match the 40 mm bore, 75 mm stroke, PT1/4 port, and mounting style. Because the stroke is under 300 mm, side-load risks are lower, but external guides are still recommended for heavy lateral loads.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X75-30 FAQ

A stop screw on the rear rod mechanically shortens the retract stroke. For this model, you can dial the retract end up to 30 mm, giving an effective stroke range of 45-75 mm. You lock the screw after setting your desired end position.

Because the rod exits both ends, force is equal in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X75-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X75-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.