
The AirTAC SEJ Adjustable Cylinder SEJ40X800-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø40mm unit covers an effective stroke of 700–800mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X800-100S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so the drive force is perfectly balanced at 528 N each way at 0.5 MPa. A stop screw on the back rod lets you mechanically dial the retract end across a 100 mm window, providing an effective stroke range of 700 to 800 mm.
Because the stroke is 800 mm, the 16 mm rod requires external guide support to prevent sag and side-load damage. The extruded aluminum barrel contains no external tie rods, and the -S magnet supports CMSE reed and DMSE electronic sensors for end-of-travel detection.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X800-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 800 mm |
| Adjustment window | 100 mm (700–800 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 700-800 mm retract position to match varying box sizes on a packaging line, utilizing the 528 N both-way force to push cartons accurately.
Fine-tune the 800 mm stroke end-stop during machine commissioning to place raw billets precisely, relying on the M12x1.25 rod thread for tooling.
Adjust the retract window up to 100 mm on the fly to accommodate different product heights without swapping the entire cylinder hardware.
This 100 mm adjustment window is built for commissioning fine-tunes or variable part changeovers, letting you set the precise 700-800 mm end position mechanically without changing hardware. If you need less force, the adjacent 32 mm bore provides 345 N at 0.5 MPa; if your load requires more, step up to the 50 mm bore which provides 825 N at 0.5 MPa. If your end position never varies, a fixed-stroke SED cylinder is a simpler choice.
The adjustable air cushion at both ends decelerates the load near stroke end but is not a mechanical lock. A plain SEJ will not hold position on air loss; for fail-safe holding on this long 800 mm stroke, pair it with an external rod lock or BSED cylinder. Ensure your ISO 15552 replacement matches the 40 mm bore, 800 mm stroke, PT1/4 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The 100 mm window allows you to dial the retract stroke anywhere from 700 mm to 800 mm. You set the mechanical end position via a stop screw on the back rod and lock it in place during commissioning.
Because the rod exits both ends, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.