
The AirTAC SE40 Standard Cylinder SE40X800 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 800mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X800 is a double-acting single-rod ISO 15552 profile cylinder engineered for long-stroke linear motion. It delivers 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa, utilizing a 16 mm hard-chrome piston rod with an M12x1.25 end thread. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Because this specific SKU lacks the -S magnet code, it is built for standard actuation without AirTAC CMSE or DMSE position sensing. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. The PT1/4 port ensures high flow efficiency for rapid extension across the 800 mm travel.
| Model | Airtac SE40 Standard Cylinder SE40X800 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 800 mm stroke to push heavy cardboard cartons from a main packaging line onto a secondary bypass belt, relying on 628 N of push force to overcome sliding friction.
Actuates the vertical up-and-down carriage of a stretch wrap machine, utilizing the long 800 mm travel to dispense film across tall pallet loads at speeds up to 800 mm/s.
Indexes a metal diverter gate on a machining center swarf conveyor, using the 40 mm bore's 528 N retract force to pull the barrier out of the chip flow path.
Selecting the SE40X800 is appropriate when an application demands 628 N of push at 0.5 MPa across an 800 mm span. If your load requires less force, stepping down to the 32 mm bore yields 402 N of push; conversely, stepping up to the 50 mm bore provides 982 N to overcome higher friction or heavier tooling. As a true ISO 15552 profile cylinder, this unit serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting accessories like FA front flanges or LB foot brackets.
At 800 mm of travel, the unsupported piston rod is highly susceptible to bending under side loads, so an external guide rail is strongly recommended to prevent rod-bearing wear. Furthermore, this plain SE cylinder does not hold its position or load when air pressure is lost or the valve is centered, as the piston will drift. If your application requires static holding without live pressure, consider the AirTAC BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
The SE40X800 generates 628 N of push force and 528 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SE40X800 SKU lacks the built-in magnet, so it cannot host CMSE reed or DMSE electronic sensors without modification. However, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using standard PT1/4 ports and 40 mm mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.