
The AirTAC SEJ Adjustable Cylinder SEJ63X100-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø63mm unit covers an effective stroke of 0–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X100-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A stop screw on the back rod lets you dial the retract end from 0 to 100mm, providing immense flexibility for dialing in exact end positions during machine commissioning without swapping hardware. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal output force of 1402N each way at 0.5MPa.
This 63mm bore unit includes a magnet for position sensing with CMSE reed or DMSE electronic sensors. It features field-adjustable air cushions at both ends to decelerate the load near the stroke ends. The extruded aluminum barrel is dimensionally interchangeable per ISO 15552 standards, and the rear rod can support a cam or flag while helping guide against rotation.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X100-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 100 mm (0–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 0-100mm retract stop to fold varying carton sizes, utilizing the 1962N both-way force at 0.7MPa to consistently crease heavy corrugated board.
Adjust the retract length on a conveyor sorting line to match different package heights on the fly, leveraging the equal push and pull forces for reliable gating.
Fine-tune the end position during stamping machine commissioning, using the 100mm window to find the precise contact point before locking the stop screw for production runs.
Confirm the 100mm adjustment window covers your required positioning range. If you need less on-the-fly travel, a fixed-stroke SED double-rod cylinder is sufficient. Sizing both ways: the next bore down (50mm) provides 825N both ways at 0.5MPa, while the next bore up (80mm) yields 2268N both ways at 0.5MPa. This SEJ63X100-100S delivers 1962N both ways at 0.7MPa, making it ideal for mid-range actuation. Remember that a plain SEJ does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate the load, not act as a fail-safe rod lock. For direct ISO 15552 replacement matching, verify the bore, stroke, 100mm window, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 100mm window. You can dial the effective stroke from 0 to 100mm to fine-tune the end position on the machine, then lock it in place.
Because it is a double-rod cylinder, the force is equal in both extend and retract directions. It provides 1402N at 0.5MPa, 1962N at 0.7MPa, and a maximum of 286kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.