
The AirTAC SEJ Adjustable Cylinder SEJ63X100-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 70–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X100-30S is a double-acting, double-rod ISO 15552 profile cylinder with a 30mm adjustable stroke window, yielding an effective stroke range of 70-100mm. A rod exits both ends, ensuring the annulus area remains identical in both directions. This provides an equal force of 1402 N each way at 0.5 MPa, eliminating speed discrepancies between extend and retract.
The rear protruding rod features a mechanical stop screw that allows you to dial in the retract end position precisely during machine commissioning. Once set, you lock the screw, achieving a fixed mechanical stop without altering the mounting hardware. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X100-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 30 mm (70–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 70-100mm retract distance to set exact die clearance on a stamping press, utilizing the 1962 N both-way force to clamp material securely.
Adjust the mechanical stop screw to accommodate different carton heights during format changeovers on a packaging line without swapping cylinder hardware.
Fine-tune the end position during commissioning to align a pneumatic gripper jaw perfectly with a varying part profile, locking the 30mm window once set.
If your application requires less force, step down to the 50mm bore, which provides 825 N at 0.5 MPa. For heavier loads, the 80mm bore offers 2268 N at 0.5 MPa.
The 30mm adjustment window is perfect for fine-tuning a retract distance to match a specific part height or trial position. If your end position never changes, a fixed-stroke SED cylinder is sufficient. Note that the adjustable air cushion at both ends decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock. As a dimensionally interchangeable ISO 15552 cylinder, it replaces any equivalent 63x100 unit with a PT3/8 port and M16x1.5 rod thread.
Quick checklist
The 30mm adjustment window allows you to dial the retract stroke down from the nominal 100mm to a minimum of 70mm. You set the exact end position via the back-rod stop screw and lock it in place.
Because the rod exits both ends, the force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.