
The AirTAC SEJ Adjustable Cylinder SEJ63X100-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø63mm unit covers an effective stroke of 60–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X100-40S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 1402 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 40 mm window, giving an effective stroke range of 60 to 100 mm.
It features a PT3/8 port, a 20 mm rod with an M16x1.5 thread, and field-adjustable air cushions at both ends. The -S magnet option supports CMSE reed and DMSE electronic sensors for exact positioning. The extruded aluminum barrel omits external tie rods for a clean profile.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X100-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 40 mm (60–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Fine-tune the retract stop on a CNC machining clamp up to 40 mm to seat parts precisely without re-machining hard stops, utilizing the 1402 N both-way force.
Adjust the cylinder stroke on the fly when a packaging line switches to a different carton height, setting the effective stroke anywhere from 60 to 100 mm.
Dial in the exact engagement distance on a small pneumatic press during R&D trials, locking the back-rod stop screw once the optimal 60-100 mm position is found.
Confirm the 40 mm adjustment window covers your required end-position range, dialing the retract stroke from 60 to 100 mm. If you need less force, the adjacent 50 mm bore provides 825 N both ways at 0.5 MPa; if you need more, step up to the 80 mm bore for 2268 N. A fixed-stroke SED is sufficient if your stop position never changes. For fail-safe load holding on air loss, use an external rod lock or BSED, as the adjustable cushion only decelerates near stroke end and does not brake. Ensure your ISO 15552 replacement matches the 63 mm bore, 100 mm stroke, PT3/8 port, and magnet option.
Quick checklist
The retract stroke is adjustable over a 40 mm window. The effective stroke can be dialed in from 60 mm up to the nominal 100 mm. You set the mechanical end position via a stop screw on the back rod and lock it after positioning.
Because a rod exits both ends, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.