
The AirTAC SEJ Adjustable Cylinder SEJ63X100-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X100-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas and an equal force of 1402 N in both directions at 0.5 MPa. You can mechanically dial the retract stroke down from the 100mm nominal mark to a 50mm minimum, providing exact on-machine end-position tuning via a back-rod stop screw.
This extruded aluminum barrel design includes a -S magnet for CMSE reed or DMSE electronic sensors. It operates at 30-800 mm/s, uses PT3/8 ports, and carries field-adjustable air cushions at both ends to decelerate the load near stroke limits.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X100-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50mm retract window to shift stop positions between 50 and 100mm, matching varying part heights on a packaging line without machining new hard stops.
Leverage the equal 1402 N both-way force at 0.5 MPa to seat a 63mm bore fitting, adjusting the back-rod stop screw during commissioning to find the exact 90mm end position.
Use the DMSE electronic sensors on the double rod to test multiple extend and retract endpoints in a lab fixture, locking the 50mm adjustment window once the ideal travel is found.
This 63mm bore provides 1962 N both ways at 0.7 MPa. If your application needs less force, the 50mm bore offers 825 N at 0.5 MPa; if you need more, stepping up to the 80mm bore yields 2268 N at 0.5 MPa. The 50mm adjustment window is ideal for prototyping or changeover between part heights, though a fixed-stroke SED is sufficient if your end position never varies. Ensure external guides support side loads, as the stop screw and air cushions only set the mechanical end and decelerate the load, providing no fail-safe position holding on air loss. Match your ISO 15552 replacement by confirming the PT3/8 port, 100mm nominal stroke, 50mm window, and required mounting bracket (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
The -50 code indicates a 50mm adjustment window. You can dial the retract stroke from the 100mm nominal mark down to a 50mm minimum effective stroke by turning the back-rod stop screw, then lock it in place.
Because the rod exits both ends, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.