
The AirTAC SEJ Adjustable Cylinder SEJ63X125-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 105–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X125-20 is a double-acting, double-rod ISO 15552 profile cylinder with a 20 mm adjustable retract window, yielding an effective stroke range of 105 to 125 mm. A rod exits both ends, meaning the annulus area is identical in both directions. This provides equal force extending and retracting—delivering 1402 N each way at 0.5 MPa.
You dial in the exact end position using a stop screw on the rear rod, then lock it down, which is ideal for fine-tuning during machine commissioning. This extruded aluminum profile cylinder features field-adjustable air cushions at both ends to decelerate the load near stroke end. It uses a PT3/8 port, a Ø20 mm rod with an M16x1.5 thread, and operates without a magnet, so position sensing is not available on this SKU.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X125-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 20 mm (105–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 105-125 mm clamping depth on an assembly press. The 1962 N retract force at 0.7 MPa securely holds the workpiece while the stop screw locks the final position.
Adjust the mechanical end stop on a packaging conveyor when switching box sizes.
Fine-tune the downstroke on a liquid filling nozzle to prevent crush damage. The 20 mm window allows precise height matching without changing machine hardware.
Verify the 20 mm adjustment window covers your required end-position variance, giving you a 105-125 mm stroke range. For sizing both ways: the 50 mm bore provides 825 N at 0.5 MPa, while the 80 mm bore yields 2268 N at 0.5 MPa. If your application never requires stroke adjustments, a fixed-stroke SED cylinder provides a simpler direct solution.
This cylinder does not hold position on air loss; the adjustable cushion and stop screw only set the mechanical end and decelerate the load, so specify an external rod lock for fail-safe holding. As an ISO 15552 cylinder, it is dimensionally interchangeable when matching the 63 mm bore, 125 mm nominal stroke, PT3/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 125 mm stroke is under 300 mm, side-load stress is minimal, but always ensure the external load is guided to prevent rod binding.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
The retract stroke can be dialed in over a 20 mm window, giving an effective stroke range of 105 mm up to the nominal 125 mm. You set the exact end position using a stop screw on the rear rod and lock it in place.
Because the rod exits both ends, force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.