verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ63X125-30

The AirTAC SEJ Adjustable Cylinder SEJ63X125-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 95–125mm without changing cylinders. Force is equal in both directions.

  • BoreØ63 mm
  • Nominal stroke125 mm
  • Adjust window30 mm
  • Effective stroke95–125 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$118.61 $126.11Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ63 stroke, mounting and version on one page All SEJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ63X125-30

The AirTAC SEJ63X125-30 is a double-acting, double-rod ISO 15552 profile cylinder offering a mechanically adjustable retract stroke. A stop screw on the back rod lets you dial the end position over a 30 mm window, yielding an effective stroke range of 95-125 mm without swapping hardware. This eliminates guesswork during machine commissioning or when matching varying part heights.

Because a rod exits both ends, the annulus area is symmetrical, delivering equal force and speed in both directions—specifically 1402 N each way at 0.5 MPa. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends safely decelerate the 20 mm rod near stroke ends. This standard SKU omits the magnet, so it does not support position sensing without modification.

Airtac SEJ Adjustable Cylinder SEJ63X125-30 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ63X125-30
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ63 mm
Nominal stroke125 mm
Adjustment window30 mm (95–125 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM16×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressureForce (both directions)
0.5 MPa1402 N
0.7 MPa1962 N
Max (@1.0 MPa)286 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ63X125-30

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
63Bore size in mm.
×125Nominal stroke length in mm.
-30Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ63X125-30 Is Used

tune

Press Feed Fine-Tuning

Dial the 30 mm retract window to perfectly time a metal blank feed stopper, using the 1962 N both-way force to push material consistently without re-mounting brackets.

swap_horiz

Packaging Changeover

Adjust the effective stroke between 95 and 125 mm on the fly to handle different box heights on a packaging line, leveraging equal push/pull speed for rapid cycling.

precision_manufacturing

Welding Gun Positioning

Set the exact electrode touch depth during robotic welding commissioning; the double-rod design prevents rod rotation while providing stable 1402 N clamping at 0.5 MPa.

Is the Airtac SEJ Adjustable Cylinder SEJ63X125-30 the Right Cylinder?

Verify the 30 mm adjustment window covers your required end-position variance; the effective stroke dials down from 125 mm to 95 mm. For force scaling, stepping down to the 50 mm bore drops output to 825 N at 0.5 MPa, while stepping up to the 80 mm bore increases it to 2268 N. If you only need a fixed end stop and no adjustability, a standard SED double-rod cylinder is sufficient.

As a direct ISO 15552 replacement, match the 63 mm bore, 125 mm stroke, PT3/8 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and stop screw only decelerate and set the mechanical end; they do not hold position on air loss. For fail-safe holding, specify an external rod lock.

AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (30mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 30mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ63X125-30 FAQ

A stop screw on the rear rod mechanically limits the retract stroke. You can adjust it up to 30 mm, giving an effective stroke range of 95 to 125 mm. Once set, lock the screw to secure the end position.

Because it is a double-rod cylinder, the force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ63X125-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ63X125-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.