
The AirTAC SEJ Adjustable Cylinder SEJ63X125-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø63mm unit covers an effective stroke of 85–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X125-40S is a double-acting, double-rod ISO 15552 profile cylinder with a 40mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers an equal force of 1402N each way at 0.5MPa, preventing unbalanced thrust. By turning the stop screw on the back rod, you dial the retract end precisely, giving an effective stroke range of 85-125mm.
This 63mm bore uses PT3/8 ports and a 20mm rod with an M16x1.5 thread. It includes a built-in magnet for CMSE or DMSE sensors. The field-adjustable air cushion at both ends decelerates the piston near the end of travel, but it is not a locking brake. For fail-safe position holding on air loss, an external rod lock is required.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X125-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 40 mm (85–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 85-125mm retract window to hit precise package flap-folding stops, utilizing the 1402N both-way force to push consistently without unbalanced loads.
Fine-tune the end position during assembly press commissioning, using the 286kgf maximum output to test engagement depths before locking the setting.
Verify the 40mm adjustment window covers your required end-position range. If you need less force, the adjacent 50mm bore provides 825N both ways at 0.5MPa. If you need more thrust, stepping up to the 80mm bore yields 2268N each way at 0.5MPa. If your application never requires stroke changes, a fixed-stroke SED cylinder is sufficient. When replacing an ISO 15552 unit, match the 125mm nominal stroke, 40mm window, PT3/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 40mm. For this SEJ63X125-40S, the effective stroke range is 85-125mm. You set the exact end position on the machine and lock it in.
Because the double-rod design has equal annulus areas, the force is identical in both directions: 1402N at 0.5MPa, 1962N at 0.7MPa, and a maximum of 286kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.