
The AirTAC SEJ Adjustable Cylinder SEJ63X125-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø63mm unit covers an effective stroke of 50–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X125-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is strictly equal in both directions at 1402N each way (0.5MPa). You can dial the retract stroke from 50mm up to 125mm via a back-rod stop screw.
This 63mm bore extruded-aluminum profile cylinder uses PT3/8 ports and a 20mm rod with an M16x1.5 thread. The 36mm adjustable air cushions at both ends decelerate the load near stroke end, but note that a standard SEJ does not hold position on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X125-75 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 75 mm (50–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 1402N both ways at 0.5MPa, this cylinder adjusts retract travel from 50 to 125mm to hit exact end stops when switching a packaging line between different carton heights.
Use the 75mm back-rod stop screw to precisely set electrode approach distance on a spot welder, locking the 1962N retraction force at 0.7MPa exactly where the part sits.
The twin rods resist rotation and side load while ejecting formed parts, allowing operators to mechanically shift the effective stroke backward 75mm during prototype tooling trials.
This SKU provides a 50-125mm effective range, letting you fine-tune the retract end-position on the machine without swapping hardware. If you need less push, the 50mm bore delivers 825N both ways at 0.5MPa; if you need more, step up to the 80mm bore for 2268N. For fixed-stop tasks needing no adjustment, a standard SED is enough. When matching an ISO 15552 replacement, verify the 125mm nominal stroke, 75mm window, PT3/8 port, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2). This unit lacks a magnet, so it cannot host CMSE or DMSE sensors.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
The 75mm adjustment window lets you mechanically shorten the retract stroke from the nominal 125mm down to 50mm. You set the exact end-position via the back-rod stop screw and lock it, providing a wide tuning range without changing hardware.
Because the rod exits both ends, force is equal in both directions: 1402N at 0.5MPa, 1962N at 0.7MPa, and a maximum of 286kgf at 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.