
The AirTAC SEJ Adjustable Cylinder SEJ63X200-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 170–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X200-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rear stop screw lets you mechanically dial the retract stroke back, yielding an effective travel range of 170 to 200 mm.
This 63 mm bore unit runs at 30-800 mm/s, uses PT3/8 ports, and carries a 36 mm adjustable air cushion at both ends. The dual rods resist side-load twisting, and the overall length is longer than a single-rod SE. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X200-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 30 mm (170–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to perfectly align sheet metal stop fingers across a 170-200 mm range, using the equal 1402 N both-way force to hold position.
Quickly reconfigure the mechanical end stop for different pallet heights without swapping cylinders, relying on the dual rods to maintain smooth guidance.
Fine-tune the exact retraction point during trial testing sequences, using the 36 mm adjustable air cushions to safely decelerate the moving mass.
Verify the 30 mm adjustment window safely covers your required end-position variance. If you need less force, the 50 mm bore neighbor provides 825 N at 0.5 MPa; if you need more, step up to the 80 mm bore for 2268 N. For fixed-retract lengths without the back rod, the SED series is a shorter alternative. This SKU lacks a magnet, so add an -S suffix if you need CMSE or DMSE position sensing. For strokes of 200 mm or more, external guides are recommended to manage side loads.
This cylinder is dimensionally interchangeable per ISO 15552. The adjustable air cushion decelerates the load near stroke end but does not lock the rod; for fail-safe position holding on air loss, use an external rod lock or a BSED unit.
Quick checklist
The 30 mm window allows you to dial the retract stroke from 170 mm up to the nominal 200 mm. You set the back-rod stop screw on the machine and lock it in place for precise end-positioning.
Because the rod exits both ends, force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.