
The AirTAC SEJ Adjustable Cylinder SEJ63X200-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø63mm unit covers an effective stroke of 160–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X200-40S is a double-acting, double-rod ISO 15552 profile cylinder with a 40 mm adjustable stroke window. You can dial the retract end from 160 mm up to 200 mm to perfectly dial in your machine's end position.
A stop screw on the back rod mechanically sets the stroke range, which you lock down after commissioning. This 63 mm bore uses a PT3/8 port and a Ø20 mm rod with an M16x1.5 thread. The built-in magnet supports CMSE reed and DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X200-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 40 mm (160–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 1962 N at 0.7 MPa, this cylinder dials the exact 160-200 mm retract to align a stamping die without machining new spacers.
Swap carton sizes quickly by turning the back-rod stop screw to shift the folding arm stroke, utilizing the equal both-way force for consistent motion.
Fine-tune the mechanical end stop on a feed conveyor within the 40 mm window, locking the Ø20 mm rod precisely where the product indexes.
Verify the 40 mm adjustment window covers your positioning range. If you need less force, the 50 mm bore provides 825 N both ways at 0.5 MPa; if you need more, step up to the 80 mm bore for 2268 N. If you never need to fine-tune the stroke after setup, a fixed-stroke SED saves complexity. Remember that the adjustable air cushion only decelerates the load near stroke end—it does not hold position on air loss, so add an external rod lock for fail-safe holding.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 40 mm. For a 200 mm nominal stroke, the effective retract range is 160-200 mm, which you lock in place after setting.
Because it is a double-rod cylinder, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.