
The AirTAC SEJ Adjustable Cylinder SEJ63X200-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 150–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X200-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm mechanical stroke adjustment window. A rod exits both ends, yielding an effective retract range of 150 to 200 mm. Because the piston sees equal annular area on both sides, output force is identical in both directions at about 1402 N each way at 0.5 MPa.
You dial in the exact end position using a stop screw on the back rod, then lock it down. This SKU omits the piston magnet, so it carries no position sensor. It features field-adjustable air cushions at both ends over a 36 mm stroke length to tame kinetic energy near the ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X200-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 50 mm (150–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 1402 N both ways at 0.5 MPa to clamp steel assemblies, using the 50 mm retract window to perfectly dial the electrode gap without swapping hardware.
Switches between varying carton heights on a single line; the 150-200 mm effective stroke lets operators reposition the sealing head rapidly during product transitions.
Fine-tunes the lower dead stop for adhesive application, leveraging the equal-force double rod to lift the probe cleanly after each cycle.
Verify the 50 mm window covers your range; if you need less fine-tuning, the fixed-stroke SED saves cost. For sizing, stepping down to a 50 mm bore yields 825 N both ways at 0.5 MPa, while stepping up to an 80 mm bore provides 2268 N. This 63 mm bore delivers 1962 N at 0.7 MPa with a max of 286 kgf at 1.0 MPa.
The adjustable air cushion decelerates the load but does not hold position on air loss; use an external rod lock for fail-safe holding. As an ISO 15552 cylinder, it drops into existing tooling when you match the 200 mm stroke, PT3/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can dial the end position up to 50 mm, giving an effective stroke range of 150 to 200 mm. Once set, you lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.