
The AirTAC SEJ Adjustable Cylinder SEJ63X200-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø63mm unit covers an effective stroke of 150–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X200-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A rod exits both ends, yielding equal force in both directions at about 1402 N each way at 0.5 MPa. You can dial the retract end from 150 mm up to the 200 mm nominal stroke.
The rear rod features a mechanical stop screw you lock after setting the exact end position. This 63 mm bore uses a PT3/8 port and includes a magnet for CMSE or DMSE sensors. Adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X200-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 50 mm (150–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to match varying part heights during press tooling changeovers, using the 1962 N both-way force to clamp reliably.
Fine-tune the mechanical stop screw on a conveyor line to index different package sizes without swapping hardware.
During machine commissioning, set the precise 150-200 mm end position on the fly and lock the rear rod stop screw to finalize the cycle.
Verify the 50 mm window covers your positioning range. If you need less force, the 50 mm bore provides 825 N both ways at 0.5 MPa. If you need more, step up to the 80 mm bore for 2268 N. If your end position never changes, a fixed-stroke SED saves space. This cylinder does not hold position on air loss; use an external rod lock for fail-safe holding. At 200 mm stroke, support side loads with external guides.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
The -50 code means the retract stroke is adjustable over a 50 mm window. Your effective stroke range is 150 mm up to the 200 mm nominal length. You set the exact end position using the stop screw on the rear rod, then lock it in place.
Because it is a double-rod cylinder, force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.