
The AirTAC SEJ Adjustable Cylinder SEJ63X30-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø63mm unit covers an effective stroke of 20–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X30-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window, yielding an effective travel range of 20 to 30mm. A rod exits both ends, ensuring the output force remains identical in both directions at 1402 N each way at 0.5 MPa.
You dial in the precise retract endpoint using a mechanical stop screw on the back rod, then lock it in place for exact machine commissioning. Equipped with a standard magnet, this PT3/8 ported cylinder integrates directly with CMSE reed and DMSE electronic sensors for non-contact position detection.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X30-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 10 mm (20–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10mm retract window to match varying component thicknesses on a pick-and-place head without swapping hardware, utilizing the 1402 N both-way force for stable lifting.
Fine-tune the mechanical stop position on a packaging conveyor edge guide within the 20-30mm effective range, locking the back-rod screw precisely to the carton width.
Set exact clamping depth on a machining fixture by adjusting the retract end-point, ensuring the 1962 N at 0.7 MPa force applies without over-compressing the workpiece.
Confirm this 10mm adjustment window safely covers your required positioning variance. If you need less force, the adjacent 50mm bore provides 825 N both ways at 0.5 MPa; stepping up to the 80mm bore yields 2268 N. If your end-position never varies, a fixed-stroke SED cylinder is a simpler choice. Remember that the adjustable air cushion decelerates the load near stroke ends but does not hold position on air loss; for fail-safe holding, specify an external rod lock. Match your replacement by verifying the 63mm bore, 30mm nominal stroke, PT3/8 port, and mounting style.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 10mm window. For this 30mm nominal stroke model, the effective travel can be dialed down to 20mm and locked at the exact position required during machine commissioning.
Because it is a double-rod cylinder, the force is equal in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.