
The AirTAC SEJ Adjustable Cylinder SEJ63X30-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø63mm unit covers an effective stroke of 10–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X30-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window, allowing you to dial the retract end from 10mm up to 30mm for precise machine commissioning. A rod exits both ends, ensuring the annular area remains identical; this yields an equal output force of 1402 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, ensuring clean ISO 15552 dimensional interchangeability.
You fine-tune the end position via a mechanical stop screw on the back rod, then lock it in place. This 63mm bore includes a built-in magnet for position sensing and uses field-adjustable air cushions at both ends to decelerate the load near the stroke extremes. Note that the cushion and stop screw set the mechanical end and decelerate the load; they do not hold position on air loss.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X30-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 20 mm (10–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 10-30mm retract distance on a packaging pick-and-place head, using the equal 1962 N both-way force to lift and place product without overshooting.
Adapt a conveyor diverter arm on the fly for different carton heights, adjusting the mechanical stop screw to hit precise intermediate positions during format changeovers.
Set exact clamping depth on a machining test jig, relying on the stop screw to find the optimal contact point before locking the hardware for the production run.
Confirm this 20mm adjustment window covers your required end-position range, giving an effective 10-30mm stroke. If you need less force, the adjacent 50mm bore provides 825 N both ways at 0.5 MPa; if your application demands more thrust, step up to the 80mm bore for 2268 N at 0.5 MPa. Because the 30mm stroke is under 300mm, side-load stress is minimal, but always guide external loads axially. If your end position never changes after commissioning, a fixed-stroke SED double-rod cylinder is sufficient. For a fail-safe load hold during air loss, add an external rod lock, as the air cushions here only decelerate. Match your replacement by verifying the 63mm bore, 30mm stroke, 20mm window, PT3/8 port, and magnet option.
Quick checklist
The 20mm adjustment window lets you mechanically dial the retract end from an effective 10mm up to the nominal 30mm stroke. You set the exact end-position via a stop screw on the back rod and lock it after commissioning.
Because the rod exits both ends, force is identical in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.